Making those Fn- laptop keys do something useful (Shallow Thoughts)

Akkana's Musings on Open Source Computing and Technology, Science, and Nature.

Tue, 09 Mar 2010

Making those Fn- laptop keys do something useful

A friend was trying to get some of her laptop's function keys working under Ubuntu, and that reminded me that I'd been meaning to do the same on my Vaio TX 650P.

My brightness keys worked automagically -- I suspected via the scripts in /etc/acpi -- and that was helpful in tracking down the rest of the information I needed. But it still took a bit of fiddling since (surprise!) how this stuff works isn't documented.

Update: That "isn't documented" remark applies to the ACPI system. Matt Zimmerman points out that there is some good documentation on the rest of the key-handling system, and pointed me to two really excellent pages: Hotkeys architecture and Hotkeys Troubleshooting. Recommended reading!

Here's the procedure I found.

First, use acpi_listen to find out what events are generated by the key you care about. Not all keys generate ACPI events. I haven't get figured out what controls this -- possibly the kernel. When you type the key, you're looking for something like this:

sony/hotkey SPIC 00000001 00000012
You may get separate events for key down and key up. It's your choice as to which one matters.

Once you know the code for your key, it's time to make it do something. Create a new file in /etc/acpi/events -- I called mine sony-lcd-btn. It doesn't matter what you call it -- acpid will read all of them. (Yes, that means every time you start up it's reading all those toshiba and asus files even if you have a Lenovo or Sony. Looks like a nice place to shave off a little boot time.)

The file is very simple and should look something like this:

# /etc/acpi/events/sony-lcd-btn

event=sony/hotkey SPIC 00000001 00000012
action=/etc/acpi/sonylcd.sh

Now create a script for the action you specified in the event file. I created a script /etc/acpi/sonylcd.sh that looks like this:

#! /bin/bash
# temporary, for testing:
echo "LCD button!" >/dev/console

Now restart acpid: service acpid restart if you're on karmic, or /etc/init.d/acpid restart on earlier releases. Press the button. If you're running from the console (or using a tool like xconsole), and you got all the codes right, you should be able to see the echo from your script.

Now you can do anything you want. For instance, when I press the LCD button I generally want to run this:

xrandr --output VGA --mode 1024x768

Or to make it toggle, I could write a slightly smarter script using xrandr --query to find out the current mode and behave accordingly. I'll probably do that at some point when I have a projector handy.

Tags: , ,
[ 17:15 Mar 09, 2010    More linux/kernel | permalink to this entry | ]

Comments via Disqus:

blog comments powered by Disqus